Airport Cable

Airfield Lighting Cables

400Hz Cables

ULV Cables

   2491X to BS 6004 Cables

450/750V PVC Insulated, PVC Sheathed Speaker Cables (4 core)

FGD200 07VV-F (CU/PVC/PVC 450/750V Class 5)

APPLICATION
The cables are multicore stranded flexible cables sheathed with thermoplastic PVC compound. The
cables can be offered with the ability to restrict the propagation of the flame in the event of a fire.
This is especially important to slow down the spreading of the fire as the cables may pass from one
area to another within a building. Applications can be found in control and power circuits, power
stations, underground tunnels, lifts, escalators, and high-rise buildings.
STANDARDS
Basic design to BS 6004, BS6500
FIRE PERFORMANCE

FlameRetardance (SingleVerticalWireTest)**	EN60332-1-2; IEC60332-1-2; BSEN 60332-1-2; VDE0482-332-1; NBN C30-004 (cat.F1);NF C32-070-2.1(C2); CEI 20-35/1-2; EN 50265-2-1*; DIN VDE 0482-265-2-1*
Reduced FirePropagation(Vertically-mountedbundledwires &cabletest)**	EN60332-3-24 (cat.C); IEC60332-3-24;BSEN60332-3-24;VDE0482-332-3;NBN C30-004 (cat.F2);NF C32-070-2.2(C1);CEI 20-22/3-4; EN 50266-2-4*; DIN VDE 0482-266-2-4

Note:
Asterisk * denotes superseded standard
Asterisk ** denotes that the standard compliance is optional, depending on the oxygen index of the PVC
compound and the cable design.
VOLTAGE RATING
450/750V
CABLE CONSTRUCTION
Conductor: Plain annealed copper wire, stranded according to BS 6360 Class 5
Insulation: PVC insulation type TI1 to BS 7655
Filler, binder (if any): PP, PET
Outer Sheath: PVC sheath type T6 to BS 7655

COLOUR CODE
Insulation Colour as per BS7671

	withearth conductor	withoutearth conductor
2Cores	-	Brown,Blue
3Cores	Yellow/Green,Brown,Blue	Brown,Gray,Black
4Cores	Yellow/Green,Brown,Gray,Black	Brown,Gray,Black,Blue
5Cores	Yellow/Green,Brown,Gray,Black,Blue	Brown,Gray,Black,Blue,Black
above 5 Cores	Yellow/Green,BlackNumbers	Black Numbers

Outer sheath: Black or as order
Physical AND THERMAL PROPERTIES
Operating temperature: -15º C to +70º C
Short circuit temperature: +160º C
Minimum bending radius: 4x Overall Diameter
Insulation resistance: 20 MΩxkm
CONSTRUCTION PARAMETERS

Conductor			fGD20007VV-f
No.of CoreXCross Section	No./ Nominal Diameterof Strands	Conductor Diameter	Nominal Insulation Thickness	Nominal Sheath Thickness	Nominal Overall Diameter	Max.DC resistance ofconductor @20°C	Approx. Weight
Noxmm2	No./mm	mm	mm	mm	mm	Ω/km	kg/km
4x1.5	30/0.25	1.6	0.7	1.1	9.5	12.1	152

Electrical PROPERTIES
Conductor Operating Temperature : 90°C
Ambient Temperature : 30°C
Current-Carrying Capacities (Amp)

Conductor cross- sectional area	Reference Method4 (enclosed inconduit in thermally insulatin gwalletc)	Reference Method3 (enclosed inconduit ona wallorin trunkingetc)	Reference Method1 (clipped direct)	Reference Method11 (onaperforated cabletray, horizontalorvertical)	Reference Method 12 (freeair)
					Horizontalflat spaced	Verticalflat spaced	Trefoil

	2cables, single- phase a. c.ord.c.	3 or 4cables, 3-phasea .c.	2cables, single- phase a.c.ord.c	3 or 4cables, 3-phasea.c.	2cables, single- phase a.c.or d.c. flat andtouching	3 or 4cables, 3-phase a.c. flat and touching or trefoil	2cables, single- phase a.c.or d.c.o rflat and touching	3 or 4cables, 3-phase a.c. flat and touching or trefoil	2cables, single- phase a.c.ord.c. or 3cables three phase	2cables, single- phase a.c.ord.c. or 3 cables three phase	3cables, trefoil 3-phasea.c.
1	2	3	4	5	6	7	8	9	10	11	12
mm2	A	A	A	A	A	A	A	A	A	A	A
1.5	18	17	22	19	25	23	-	-	-	-	-

Voltage Drop (Per Amp Per Meter)

Nominal CrossSection Area	2cables d.c.	2cables, single-phasea.c.		3or 4cables, 3-phase a.c.
		Ref.Methods3 and 4 enclosedinconduitetc,inoron a wall)	Ref.Methods1 and11(clippeddirector ontraystouching)	Ref.Methods3 and 4 (enclose dinconduitetc ,inoron a wall)	Ref.Methods1,	Ref. Methods 1and11
					11 and12 (intrefoil)	(Flat and touching)
1	2	3	4	5	6	7
mm2	mV/A/m	mV/A/m	mV/A/m	mV/A/m	mV/A/m	mV/A/m
1.5	31	31	27	27	27	27